The TS508 is an easy-to-use hand-held TPMS service tool with complete TPMS capabilities including activation of All known sensors, programming mx-sensors to replace OE sensors, displays vehicle-specific relearn procedures and can connect to the vehicle to perform OBD II-relearn for the increasing number of vehicle’s requiring this type of relearn. The TS508 features a new streamlined user interface with quick start and advance mode.
-
Blue Cobra Truck Tire Demount Tool
Quickly demount nearly any 22.5″ and 24.5″ tubeless truck tire, up to a 13″ wide wheel. Ergonomic shaped steel handle with no-slip grip for optimum leverage while reducing back injuries. Solid steel Cobra head is press-fit into the steel handle — no fasteners to loosen or fall out. Allows demounting of the tire without lifting the entire wheel and tire off the ground — reduces back injuries. Aluminum bead support to grab the top bead of Super Single and Super Wide tires.
$365.90 -
Bolt Buster Heat Induction Tool
Bolt Buster Heat Induction Tool with Advanced Coil Kit. An all-in-one design that produces 1,000 watts of power at 95% + power efficiency. This patented design produces MORE Power Transfer at LESS current draw = Runs Cooler, More Power Also Comes complete with an Advanced Coil Kit, Custom Storage Case, Owners Manual on CD, 1 Year Parts and Labor Warranty.
$435.00 -
Gaither 5 Gallon Bead Booster
This unit will work on all light truck, RV, large truck, and some agricultural tires. The Bead Booster® features a safety pop-off valve to prevent overfilling, and a set of goggles and earplugs for protection. The Bead Booster® tanks are ASME, CE and CRN approved and certified.
HOW THE BEAD BOOSTER® GB-5Z WORKS:
Gaither’s Bead Booster® is designed to assist in the inflation of tubeless tires by setting the bead with a quick release of air pressure. To use the Bead Booster® efficiently, simply fill the tank to the necessary pressure and attach an air line to the valve stem of the wheel. Then aim the barrel between the tire bead and wheel flange, and release the manual valve in order to allow a blast of air to set the bead.$338.03 -
Gaither Bead Bazooka 10L
The BEAD BAZOOKA® is the most powerful tire bead seater tool in the world, with its incredibly convenient trigger release, it makes seating the bead on even the most stubborn tire effortless.
Lighter, faster, Safer, and More Powerful than any other bead seater on the market, the BEAD BAZOOKA® is a must for anyone serious about tire service.
By utilizing our special RAR (Rapid Air Release) valve it is able to release air much faster than any other bead seaters. This allows us to make the BEAD BAZOOKA® much smaller while still delivering the bead seating performance you need.
$524.50 -
Golden Buddy Mounting/Demounting Tool
AME Golden Buddy Mounting & Demounting Tool
• Mount tool assembly for 22.5 and 24.5 tires/wheels
• Demount assembly for 22.5 and 24.5 tires/wheels
• Bead keeper
• Heavy duty steel construction ensures long life
• Nylon rollers protect the bead
• Sold as a complete setGolden Buddy Instruction Manual & Parts Breakdown
$450.00 -
KEN29999 ValveCapper Pro
The ValveCapper Pro is 4 tools in 1; a valve cap remover and installer as well as a valve core remover and installer. The valve core end features a patent pending design that grips and holds the valve core to keep it in the tool safely until it is ready to be reinstalled. The ValveCapperPRO is 11.8 inches long and molded from glass-filled nylon. This length allows the tool to reach to the inside dual tire’s valve stem without discomfort or risk of burns from hot wheel components. Each end of the tool features a flexible thermoplastic rubber grip. One end is designed to fit over and remove the valve cap and the other end features a valve core remover that grips and holds the valve core. Because the valve core is held in place, the chances of dropping or losing the core are reduced dramatically.
$14.95 -
KEN31568 Standard Wheel Cover Puller/Replacer
Removes wheel covers quickly and easily without gouging or scratching them. Rubber head T11RH prevents damage to hub cap and is replaceable.
$34.80 -
KEN32109 9″ Motorcycle Tire Iron
Extended length of the flat curved sliding surface provides mounting ability comparable to much longer traditional tire irons. Designed for mounting and demounting tires. Best if used in pairs.
Length: 9″
Stock: 7/16″
$27.78 -
KEN32120 24″ Tire Iron
This tool is designed for fast and efficient tire changing. Use the 24″ spoon to mount or demount passenger car, motorcycle, ATV, and light truck tires.
Length: 24″
Stock: 11/16″
$46.24 -
KTB Liquid Tire Balancer 32 oz.
KTB Tire Balancer is one of the best ways to balance a tire on the market today. Sold in 32 oz. bottles, KTB Tire Balancer offers several benefits.
- Instant tire balance for the life of the tire.
- Truck tires run 16% cooler to extend tread life by reducing heat build up.
- Maintains air pressure – keeps bead area pliable and helps stop dry rot.
- Lubricates for a perfect bead seat.
- Helps detect valve & tire damage and rim cracks
- Does not freeze
Price range: $13.99 through $154.95 -
Locking Lug Master Key Set
Frustrated when a customer brings a car to your garage with aftermarket wheels that need to be removed? Then it’s time you got Steelman PRO’s Locking Lug Master Key Set. The set was designed explicitly for the purpose of removing locking lug nuts on aftermarket wheels. The 16 piece set comes with both standard (SAE) and metric pieces that can be used on Spline, Star, Hex and Fluted Hex fasteners. As long as you have a combination wrench handy and you attach the corresponding key from the kit, you’ll be hard pressed to find an aftermarket wheel you can’t remove with this set. The kit includes a durable blow-molded plastic case with locking clips for easy organization and hassle-free storage.
$78.95
