- Black, diamond-shaped, fabric-reinforced repairs with an extremely tough cover stock and beveled edges
- Designed to cover bottom side of belt for breakthrough damage
- Recommended for permanent repair of impact breaks
- Must be applied using Pangofol and PANG Activator
- Available in four different widths
- NDP5 – 5.25″ x 6″ bx of 10
- NDP10 – 8″ x 10″ bx of 5
- NDP15 -10.5″ x 14″ bx of 3
- NDP20 – 17.5″ x 18″ bx of 2
Reinforced Diamond Repairs
Price range: $159.93 through $232.66
Related products
-
#816F Bufsol Pre-Buff Cleaner
Bufsol Pre-Buff Cleaner is a solvent designed to clean surfaces before buffing in rubber fabrication or splicing applications. Bufsol optimizes adhesion by leaving a contaminant-free surface with no oily residue.
- CFC-Free
- Can be used on rubber, metal, fiberglass and plastic
- Recommended for cleaning rubber and metal before applying primers or bonding cements
- Available in 11 oz. aerosol, quart, gallon cans and a 55 gallon drum. Please call for price on 55 gallon drums
- Material Safety Data Sheet
Price range: $11.99 through $65.99 -
RS3F Rapid Solution Heat Cure Cement
Rapid Solution is a black vulcanizing cement used with hot splicing materials in conventional vulcanizers. Recommended for hot splicing, repair or fabrication of rubber conveyor belts, or heat-curing pulley lagging.
- Formulated for curing temperatures from 210°F (100°C) to 320°F (160°C)
- For best results, use with PANG low temperature rubber compounds, cushion gums or PANG cover stock and tie gum
- Available in: Quart and Gallon
Price range: $17.17 through $61.39 -
#968F PANG Activator
All Pangofol products must be used with PANG Activator, designed for two-part cold bonding cements. PANG Activator is available in 15cc, 30cc and 60cc. Mix 15cc Activator to every 8 oz. Pangofol.
For safety information, please see the Material Safety Data Sheet.
Price range: $11.65 through $16.99 -
#960 PANG Metal Primer
PANG Primer prevents oxidation of prepared metal surfaces for maximum adhesion with rubber or PVC cements. PANG Primer is recommended for use on metal or concrete surfaces before Plastopang or Pangofol is applied.
- Gray finish
- Can be used to coat chutes, hoppers, drums and tanks prior to applying PANG adhesives
- Fast-drying
- Can be applied with a brush, roller or sprayer
- Available in quarts or gallons
- Material Safety Data Sheet
Price range: $48.99 through $174.99
