- Black, diamond-shaped, fabric-reinforced repairs with an extremely tough cover stock and beveled edges
- Designed to be used on top side of belt
- Recommended for permanent repair of impact breaks
- Must be applied using Pangofol and PANG Activator
- Available in four widths
- DP5 – 4-1/2″
- DP10 – 7-1/2″
- DP15 – 11″
- DP20 – 14-1/2″
Non-Reinforced Diamond Repairs
Price range: $95.86 through $149.58
Related products
-
#992F Pangofol Black
- Black rubber-bonding cement
- CFC-Free, free of aromatics
- Does not contain trichloroethylene (TCE), reducing its toxicity
- Excellent for replacing TCE-based products without any performance loss
- Oil and chemical resistant
- Can be used to bond rubber-to-rubber, whether natural rubber, SBR or Neoprene
- Also used for cleat fabrication, rubber-to-metal bonding and bonding with concrete, wood, fiberglass, fabric and other substrates
- Available in quart, gallon and 55 gallon drum sizes. Call for price on 55 gallon drum.
- Material Safety Data Sheet
- Pangofol General Instructions
Price range: $36.99 through $133.99 -
Pangit A&B Vulcanizing Rubber
Pangit A&B Compound is used for filling injuries in belts and vulcanizes to a resilient 55-60 Shore A hardness.
- Two-part self-vulcanizing rubber (dries black)
- Can be used for repair of steel-cord conveyor belts and other rubber products
- Use with Blue Maxibond to bond repair to rubber substrates
- General Information & Instructions
- For safety information, see the material safety data sheets by clicking the following links: Pangit A Compound Pangit B Compound
$53.99 -
RS3F Rapid Solution Heat Cure Cement
Rapid Solution is a black vulcanizing cement used with hot splicing materials in conventional vulcanizers. Recommended for hot splicing, repair or fabrication of rubber conveyor belts, or heat-curing pulley lagging.
- Formulated for curing temperatures from 210°F (100°C) to 320°F (160°C)
- For best results, use with PANG low temperature rubber compounds, cushion gums or PANG cover stock and tie gum
- Available in: Quart and Gallon
Price range: $17.17 through $61.39 -
#960 PANG Metal Primer
PANG Primer prevents oxidation of prepared metal surfaces for maximum adhesion with rubber or PVC cements. PANG Primer is recommended for use on metal or concrete surfaces before Plastopang or Pangofol is applied.
- Gray finish
- Can be used to coat chutes, hoppers, drums and tanks prior to applying PANG adhesives
- Fast-drying
- Can be applied with a brush, roller or sprayer
- Available in quarts or gallons
- Material Safety Data Sheet
Price range: $48.99 through $174.99
